This is an update on Scrap of the Week #32. That scrap was a little offcut of brown upholstery leather and I wanted to create an insta-bag (instant-bag) handle, rather like the fabulous Hiromi’s. Here’s how I got on.
I first marked up my strip (measuring 24 cms x 2 cms) with ruler and my pen-of-choice, the Pilot Frixion*: a really great tool for crafters which I first heard about via Julie‘s embroidery and knitting blog, Button Button. The pen, which you should be able to find quite easily in your local stationery shop, is marketed as erasable and just happens to work brilliantly for marking up non-washable surfaces such as leather as it will simply rub away afterwards. Wonderfully, Julie discovered that it also seems to disappear with the slightest application of heat – a light iron removes it just like magic – so it’s extremely useful for embroidery purposes. Do try it, but please test it first on a teeny scrap of your precious antique textiles before scribbling with gusto! [NB Please see addendum below]
Having marked up my strip, I cut it out with a good sharp pair of craft scissors – no need for blade cutters or fancy cutting tools.
Constructing the strap
I grabbed 4 old curtain rings (I didn’t have any nice enough D-rings) and some linen twine. The curtain rings worked well as a D-ring substitute, though it makes the handle look slightly like a horses’s bit (which, personally, I don’t mind). Being strong enough to hold up curtains, they’re also guaranteed to be strong enough to hold your groceries without buckling. Which is reassuring.
Now, the metal riveting on Hiromi’s original had foxed me. I didn’t want to invest in more hardware but to use up what I already had. And I couldn’t bring myself to use clashing rings and rivets, so I thought I’d play with some thread instead. When stitching leather, it’s important not to use cotton as the leather will rot it. Linen is perfect, however. I rootled through my vintage threads and found some likely candidates, including a reel of heavy gauge Barbour twine.
Turning over my handle ends about 2.5 cms, and with the two rings tucked in place, it was time to punch a couple of holes in my strap with a small leather punch (a useful piece of kit which I use routinely to construct my hanging tags, by the way).
I eyeballed my measurements, but you might like to mark up first to get the positioning just right.
To sew it, I folded my ends over my curtain rings.
Then I threaded my rather bulky linen thread through a tapestry needle and passed it out through one of the holes from inside the folded end. I left a few inches of unknotted thread behind, enough to tie a good strong knot later. I worked the thread through the holes several times before bringing the thread out where I’d begun, tying a knot (reef, not granny) to secure it and snipping the ends so that nothing showed on the outside of the strap. Incidentally, you can buy little cards of bookbinder’s linen thread for about £1.50, or reels of fine linen thread from about £1.60.
And that was it.
I’ve modelled it (badly, and in artificial light too) with a classic old hanky/neckerchief, just to show you how well it will hold a piece of relatively light cotton fabric. I intend to make a Liberty square for this one from the fabric shown, but I rather like the rustic Little-Red-Riding-Hood look, perfect for toting cookies to Grandma’s. I’ll show you my preferred methods for hemming a Liberty lawn square (for use as a hanky, scarf or insta-bag) another time soon.
*A note on the Pilot Frixion. Thanks so much to Mimi Kirchner for sending me this review of the pen’s performance at low temperatures subsequent to ironing. In summary, be careful if you’re thinking of using this pen for art purposes and don’t intend to wash your finished creation: the markings may reappear! 21/9/13